If your referring to the brake rotor take the wheel off, then the caliper. After that the rotor just slides off.
Removing the caliper is the trickiest part, but still so simple. You may need to release pressure on the rotor. You can do this by gently pushing the piston in. Once the caliper is removed do not touch the brake!
I assume that you have removed the wheel and so on. In order to remove the rotor you will have to remove the caliper and its bracket. Only after you will be able to remove the rotor.
Remove wheels Remove caliper mounting bolts Slide caliper off rotor Peel rotor off hub
Remove caliper,rotor comes right out
Remove wheel Remove caliper mounting bolts Slide caliper off rotor Rotor should slide off hub Remove wheel Remove caliper mounting bolts Slide caliper off rotor Rotor should slide off hub
remove rotor from Mercedes 450sel?
Remove the wheel, remove the caliper, and the rotor will just come off.
You didn't specify brake rotor or ignition rotor. If it's the brake rotor, remove the front wheel, remove the brake caliper, remove the bearing dust cap, remove the cotter pin, and then remove the castle nut, this will free up the rotor to be removed from the spindle. While it's off you may as well replace the wheel bearings. If its the ignotion rotor you simply remove the distributor cap, and then two screws hold the rotor on.
Remove the tire and wheel. Remove the brake pads and break hardware. The rotor will slide off. You may need to tap the rotor with a hammer.
Remove wheel Remove caliper mounting bolts Slide caliper off rotor Rotor will slide off hub assembly
2005 Toyota tacoma how to remove the brake rotor
Remove the distributor cap. Do not remove the plug wires. Pull the rotor off or remove the screws that hold it on, it that applies, and revese the process with a new rotor.
Brake rotor? 2 wd? Remove wheels Remove caliper mounting bolts Slide caliper off rotor rotor should "peel off" hub If not "peel off" type Remove center dust cover from hub Remove cotter pin Remove slotted washer Remove nut and washer (bearing will fall out) Rotor will slide off spindle