If you can get a hold of the nut with a pair of vice grips and wiggle it back and forth till the bolt breaks. Possibly use a hack saw blade by itself between the hinge and the toilet. Another thought. If you are careful, you can use a drill and drill out the head of the bolt. Don't put too much pressure on it, if you slip, it could crack the bowl.
You may have to cut them off if they are too badly corroded to be removed.
If you have to, you should be able to get a hack saw blade between the tank and the base and cut the bolt.
Rusting bolts normally indicates that the bolts are brittle. Taking a pair of water pump pliers and squeezing really hard will most of the time break the rusted bolt so you can remove the toilet seat. Otherwise depending on the type of toilet seat installed, you can drill a hole right through exactly where the rusted bolts slot in, so helping you remove the toilet seat.
form_title= Toilet Seat form_header= Sit comfortably with a new toilet seat. What color do you want the toilet seat?*= _ [50] Do you want the toilet seat cushioned?*= () Yes () No Do you need to remove an old toilet seat?*= () Yes () No
remove the 2 bolts on the floor in front of the seat, and the 3 bolts on the floor at the rear of the seat.
No, toilet seats are not hard to install. There are two bolts that go through the rear of the opening on the toilet and when these bolts are secured, the seat is installed.
To remove the back seat of a 1998 Toyota Corolla, you will need to remove the carpet to expose the bolts for the seat. Then, loosen the bolts by removing the nuts. You can then remove the seat.
* On fixed seats remove the bolts at base of the seat back sidecushions and detach them.Remove the two bolts at the rear of the seat cushion and detach the cushion assembly.Remove the two bolts at the base and remove the seat back * On folding seats remove the two bolts at the front of the seat cushions and detach the cushion assembly.Fold the seat backs forward remove the bolts and lift the assembly out
The 2006 Honda CBF 250 seat is held in place by four retaining bolts. Remove the retaining bolts to remove the seat.
On fixed seats remove the bolts at base of the seat back side cushions and detach them.Removethe two bolts at the rear of the seat cushion and detach the coushin assembly.Remove the two bolts at the base and remove the seat backs. On foldingseats remove the two bolts at the front of the seat cushions and detach the cushion assembly.Fold the seat backs forward,remove the bolts and lift the assembly out.
there are two bolts in the back of the seat. remove them and then slide the seat back about an inch and remove
The bolts are visible at the base of the seat. Remove them and lift out the seat.
Look under the frigging seat. There are nuts or bolts on the brackets under there holding the seat to the floor. It is up to you to remove the right bolts.
The Yamaha 1200 motorcycle seat is held in place by four retaining bolts. Remove the retaining bolts and the seat will come off.