Want this question answered?
Remove center hub cover maybe spring loaded Slide gear out Remove spanner nut Remove washers Wheel bearing should slide out Hub should slide off spindle
Loosen and remove center hub bolts Slide axle out Remove spanner nut Remove drum
You have to have a spanner wrench. One you have that, remove the safety ring, use your spanner wrench, and it comes right off.
use a slide hammer to remove the hub from the bearing. do this on the car. or remove complete knuckle and press hub out with a press
The hub is pressed in. Remove the knuckle with the hub and bearing in it and take it to local machine shop.
There are two tools needed to remove a front hub from a 2003 Frontier. These include a screwdriver and a cone wrench.Ê
The front hub takes a 35mm deep socket. (It is not necessary to remove the hub to change the rotor.)
Remove bolts at center hub Slide axle out Remove spanner nut drums should slide off
# Raise and safely support the vehicle securely on jackstands. # Remove the brake caliper assembly. # Remove the front disc brake caliper anchor plate. # Remove the hub grease cap. # Remove the cotter pin. # Remove the spindle nut. # Remove the front wheel outer bearing retainer washer. # Remove the outer front wheel bearing. # Remove the hub grease cap gasket. # Remove the front disc brake hub and rotor. # Remove the wheel hub grease seal. # Remove the inner front wheel bearing.
Remove Wheels Remove center hub Probably spring loaded Remove gear (Should slide out) Remove spanner nut with spanner socket Remove brake caliper and support Wiggle rotor bearing should fall out Remove rotor
you cant
I assume it has dual rear wheels Remove center hub bolts Slide axle out of banjo Remove spanner nut and washers Drum should slide off hub