Use a thin tipped screw driver to pop the clips on 4 sides of the black shroud in the centre console that houses the digital clock, hazard button AC vents etc, raise the shroud up (u dont have to disconnect the vent control cable). On 4 sides of the stereo u will find a size 13 nut with provision for star screw driver, open these 4 nuts and pull stereo out slowly then unplug cables from the unit at the back. To put it back, do the same in reverse. Paul Otim Proud ST190 owner in Uganda, East Africa. Use a thin tipped screw driver to pop the clips on 4 sides of the black shroud in the centre console that houses the digital clock, hazard button AC vents etc, raise the shroud up (u dont have to disconnect the vent control cable). On 4 sides of the stereo u will find a size 13 nut with provision for star screw driver, open these 4 nuts and pull stereo out slowly then unplug cables from the unit at the back. To put it back, do the same in reverse. Paul Otim Proud ST190 owner in Uganda, East Africa.
how to replace rack end of Toyota corona 93?and the tools also tnx
remove the radiator, then remove 4 screws that holds the fan ,,done..
There should be a lock on the ignition a push button that you push and turn to remove the key
They pop off. You use a screwdriver or some type of panel removing tool.
I believe it is located on the passenger side valve cover. You will have to remove the air surge tank to access it.
Does a toyota 4 runner have the same frame as a toyota tacoma
The air conditioner low pressure switch in a 1993 Toyota SR5 is behind the glove box. There are three screws inside the glove box to remove for access.
yes
location of the ecm on the Toyota land cruiser 93
The brake rotor specs for 93 Toyota corolla the outside diameter 255 mm and inside diameter is 142.2 mm.
toyota 4 runner 93 alarm
The small trucks do not have an airbag.