Depends on the type of lock, If its a common mortice lock you may be able to work it out with a screwdriver but if it has been jammed into a cylinder lock as an act of vandalism then the only real way is to change the lock. If you are locked out your door will need to be forced but you are best to pay whatever it takes to get a Locksmith or a tradesperson who knows how rather than attempting yourself. Thes types of locks can be forced relatively easily leaving very little damage, If you kick it in you will be needing to spend a lot more on a new door and frame.
1996 rodeo- how to remove key from lock ignition?
with a barrel lock key
Removing a ignition lock cylinder from a 2002 ford windstar with no key
With the key.
To change the ignition key lock you have to: 1. Pull the steering wheel off. 2. Remove the lock plate. 3. Remove the turn signal switch. 4. Remove the set of contacts. 5. Remove the retainer bolt. The lock will then pull out of the housing.
Remove the inside door panel of your 2000 Cadillac Escalade. Remove the door lock linkage. Remove the door lock retaining bolts. Reverse the process to install your new key door lock.
you cannot
If no key, you'll have to destroy the cardboard glove box and to access the lock bracket....remove the upper bracket that the lock grabs onto located at the mid-top of the opening...may need to do a little prying....or remove the lock from the backside.
you don't.
One can turn the keypad lock on or off on a Nokia Aisha 300. To turn the lock on or off press the lock key and drag the lock key to unlock to unlock the phone.
use the right key
check your battery connection, your key will lock down if the battery is low or it is not grounded, no power will lock it in the slot