Want this question answered?
behind driver side rear wheel
Right beside the gas tank.
The evap cannister is located underneath the vehicle in front of the fuel tank.
Remove the engine sight shield. Remove the evaporative emission (EVAP) line from the canister purge solenoid, perform the following: * Push the large size white retainer portion in. * Push down, while pulling up slightly in order the disengage the tube. Disconnect the EVAP canister purge solenoid electrical connector Remove the EVAP canister purge solenoid bolt Remove the EVAP canister purge solenoid and insulator Reinstall in reverse order....... toque spec is 91 inch lbs
Trouble code P1446 means: EVAP Canister Vent Valve Malfunction (Closed)
Check out this website for it's location b15sentra.net/forums/showthread.php?t=142973
The Evap canister (charcoal canister ) collects fuel vapour until it is drawn into the intake system when the evap solenoid is operated by the ECU
where is evap canister on 2003 Hyundai sonataType your answer here...
The computer on the car purges the evap canister automatically by activating the purge solenoid.The computer on the car purges the evap canister automatically by activating the purge solenoid.
P0443 - EVAP control system CANISTER PURGE VALVE CIRCUIT MALFUNCTION - VPWR circuit open - Evap canister purge valve circuit shorted to ground - damaged EVAP canister purge valve - EVAP canister purge valve circuit open - EVAP canister purge valve circuit shorted to VPWR - damaged PCM
You can remove it and clean the filter inside it or you can replace it.
THere is the Evap canister and associated lines and valves. The engine will not operate properly with this removed.