Drain the freon from the Montana into a reclaiming machine. Remove the compressors drive belt. Disconnect the freon lines from the compressor. Unbolt the compressor and remove it. Bolt the new compressor into place, then connect the lines using new gaskets. Hook the belt back up. Pull a vacuum on the system, then fill with freon.
Remove the drive belt from the air conditioner compressor. Remove the air conditioning hoses from the compressor. Remove the retaining bolts from the air conditioner compressor.
Remove the Freon from the compressor. Remove the air conditioning hoses. Remove the compressor belt. Remove the compressor retaining bolts. Reverse the process to install the new air conditioner compressor.
.You can remove the air conditioner compressor, from your Oldsmobile automobile, by removing the compressor belt. Remove the air conditioning Freon. Remove the Freon lines. Remove the retaining bolts
The air conditioner/compressor sits on the front passenger side on top of the fender. Remove the water reservoir and then you can disconnect and remove the air compressor. I do not know yet how to remove the air dryer as I cannot see how to remove the air lines from the dryer. I did remove the dryer from the compressor though, by removing a single screw then turning the 1/4 turn and pulling it out of the compressor....so at worst I will be able to put my new compressor in with the old dryer.
You will need to remove all of the Freon from your air conditioning system. Remove the air conditioning hoses. Remove the compressor belt. Remove the compressor retaining bolts. Reverse the process to install the new air conditioner compressor.
alternator is bad
cant open tailgate
you must remove the front suspention crossmember and suspension.
You remove the compressor and replace the belt with one for a truck with out ac
I cannot find how to remove the cup holder from the dash of my 2001 Pontiac Montana
you have to take it to a shop that can professionally drain the refrigerant from the compressor. It is very hazardous stuff and CAN NOT be drained into the air, it has to be captured. Then you just have to unbolt the compressor. You may have to remove the radiator first.
pull it really hard