gentltly pull off the top pad closest to the rear window, not the back cushion, its held on with plastic snap things. then you will see the back seatrest has four clipd with screws. remove those screws and gently push the seat back downward to slide it of the lower clips. then unbutton the seatbelt holders. and you can remove the hinges for the lower seat if you want.
Pop back the plastic cover from the center of the crank and remove Allen or Philips screw. Handle will then pull off.
yea i bought a 1992 dodge Dakota back a couple years ago from a guy that had ran into a tree i had to replace the front end and all the parts i got ranged from 1991 to 1995 so hope this helps you out
Remove the wiring harness from the back of your 1995 Dodge Ram horn. Remove the horn retaining bolts. Reverse the process to install the new horn.
Back pass side of the engine.Back pass side of the engine.
Remove the back seat with a number 55T torque screw socket and then you can slide out the back panel to get to the speakers.
Go back through and check your connections!
AnswerYou add the transmission fluid through the tube at the back of the engine compartment in the dipstick that says trans fluid.
You probably don't remove the cover. The bulb is more than likely accessed from the back side. Read you owner's manual.
its on the back of the fuse cover
after hardwhare is removed, font seat in recline and all the way back it will come out the passenger front door
Yes, there is a fuse panel diagram for a 1990 Dodge Dakota. It is found on the back of the panel cover and it can be found in the owners manual.
Remove the bolts.