Want this question answered?
Probably a faulty blend door actuator. Remove the glove box to gain access to the actuator. Replace the actuator with a new one.
Remove the dash assembly to gain access to the blend door actuator.
get a person who does that work to come over
You need to remove the glove box and then you will see the actuator. The glove box has about 6 hexagon screws which are simple to remove. However reaching the actuator is another story. Good Luck!
You have a faulty temperature blend door actuator located directly behind the radio. Remove the radio and remove the blend door actuator held to the heater case with three 8mm screws, and replace it.
The blend door actuator is under the glove compartment near the blower motor. You will see a wire attached to it and will need a small nut driver to remove it.
Where is the blend door actuator located on a 2005 malibu
Probibly your blend door motor is stripped out. Remove motor and check door operation manually
Disconnect the battery supply. Remove the inside driver side dashboard under cover. Remove the actuator and screws. Reverse to install.............
How do I locate the heater blend door actuator in a Ford f150 pickup
how to replace a blend door actuator on a 1999 ford ranger
locate blend door actuator for 1997 pontiac bonneville se