I had trouble with the lens on my 97 Mazda. I found that after you take out the screws, you slide it towards the midline of the truck. (Rt lens moves left, L lens moves right.
you remove plastic red/white cover with 2 screws and remove bulbs.
you dont go to the dealer who will charge you 50.00 for replacing a 5.00 part that takes 2 minutes!
The parking brake cable on a 2005 ford f150 runs under the frame. Where the cable splits off to the wheels there is an adjustment. Tightening the nut will make the brakes tighter.
A problem with the Anti-lock Brake System has been detected . It could be a fuse , a sensor , or some other problem . As long as the red " BRAKE " light in your dash is not lit up , you still have " normal " brakes
Under the dash near the brake pedal lever.
drop the tailgate on side of bed where tailgate closes are couple of screws. thses hold the light assembly in bed. remove thse ,then remove light assembly light bulb is the able to be removed from back of assembly
Not a major job Disconnect brake lines Disconnect electrical level sensor Remove mounting bolts BENCH BLEED NEW MASTER CYLINDER PRIOR TO INSTALLATION
Brake switch.
Check the operation and alignment of the brake light switch, located at the upper end of the brake pedal under the dash area
You want a violent twitch for your 1997 Ford F150?
How do you get the lower ball joint out of the axcel hub assmb on a 2005 4x4 f150. the axcel appears to be in the way and the ball joint hits it when trying to remove. any help out there
remove wheels.remove brake calipers, remove 4x4 locking hub.with special socket remove axle locking nut. brake rotor will the slide off enabling you to change bearings