answersLogoWhite

0


Best Answer

I just finished replacing a mirror on a 1999 lesabre and they are probably the same. The button is held in place by a spring steel clip that is visable at the square end of the button. It looks like the button and clip are made together but they aren't you place a small pocket screw driver in the center slot of the clip and pry up and out at the same time on the bottom of the button and the button will come out. ...

User Avatar

Wiki User

13y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you remove the button on the inside rearview mirror of a 1997 Buick Lesabre so that you can glue the button back onto the windshield and then attach the mirror?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you re-glue the rearview mirrow on 1997 buick lesabre?

Unspring the button then glue it to windshield with 'Loctite' Auto Mirror Adhesive,


How do you remove the button on the inside rearview mirror of a 1998 Chevrolet lumina so that you can glue the button back onto the windshield and then attach the mirror?

Remove the mirror and use a heat gun to remove the button. Caution: There is always the possibility that the windshield will crack.


How do you replace a rear view mirror in an 1999 Intrigue can't get the button off the mirror?

I have a 1999 Oldsmobile Intrigue. The rearview mirror on my car has twin maplights, and on the back it says "Donnelly IE 8012001". I just re-glued my mirror to the windshield after it fell off. Some other cars use a screw to attach the button to the mirror, but this mirror does not. Instead, I used a flat-head screwdriver to pry the button out of the mirror -- be careful to not to hurt yourself or the mirror. After prying the button out, I studied the mirror, and there doesn't appear to be any other way to remove the button. When gluing the button to the windshield, be careful to figure out which side and orientation the button needs to face before gluing it to the windshield.


How do you disassemble the metal bracket on the rear view mirror on an 2000 Oldsmobile Intrigue to glue to windshield?

I have a 1999 Oldsmobile Intrigue. The rearview mirror on my car has twin maplights, and on the back it says "Donnelly IE 8012001". I'm guessing the 2000 Intrigue uses the same parts. I just re-glued my mirror to the windshield after it fell off. Some other cars use a screw to attach the button to the mirror, but this mirror does not. Instead, I used a flat-head screwdriver to pry the button out of the mirror -- be careful to not to hurt yourself or the mirror. After prying the button out, I studied the mirror, and there doesn't appear to be any other way to remove the button. When gluing the button to the windshield, be careful to figure out which side and orientation the button needs to face before gluing it to the windshield.


Attach rear view mirror 1999 LeSabre?

Remove the 'button' from the mirror stalk and glue it to the window with 'Loctite Auto Mirror Adhesive'. It will stick almost instantly and you can attach the mirror to it in about 5 minutes.


How do you disassemble the inside rear view mirror mount on a 1998 intrigue?

I have a 1999 Oldsmobile Intrigue. The rearview mirror on my car has twin maplights, and on the back it says "Donnelly IE 8012001". I'm guessing the 1998 Intrigue uses the same parts. I just re-glued my mirror to the windshield after it fell off. Some other cars use a screw to attach the button to the mirror, but this mirror does not. Instead, I used a flat-head screwdriver to pry the button out of the mirror -- be careful to not to hurt yourself or the mirror. After prying the button out, I studied the mirror, and there doesn't appear to be any other way to remove the button. When gluing the button to the windshield, be careful to figure out which side and orientation the button needs to face before gluing it to the windshield.


How do you change a rearview mirror on a 2007 Nissan Frontier?

I recently had to repair the rearview mirror on an '02 Nissan Xterra. It may be different, but perhaps it used the same technique. The mirror is connected to a metal "button" which is glued onto the windshield. In my case the glue had come undone and I had to remove the button from the mirror in order to re-affix it to the window. You can probably get the rearview off the button while still on the windshield in the same way. From the bottom of the housing there's a small notch where you can see the button and a small tab of spring steel. Use a hack saw blade or something else flat and long and slide it in between the tab and the button. Push it in around .75" until you bump up against another spring tab. Continue to push against it and it will release the lock. While pushing on it pull the mirror upwards off the button.


Where is the rear windshield wiper button?

It is located on the windshield button on your dashboard


Do I need to remove the button on the rearview mirror before applying glue to reattach?

It is best done with the button removed from the mirror. Clean the glass and the button thoroughly with rubbing alcohol before applying the glue and be sure the button is right side up and exactly where you want it before you attach it to the glass. Allow the glue and button to dry several hours before reattaching the mirror.


How do you attach a button cover?

pop it over the button


Where is fuel shut off reset button on 1998 Buick LeSabre?

The fuel shut off reset button is located inside the 1998 Buick LeSabre. It can be found on the firewall in the front passenger side.


How do you defog a windshield?

well there is useually a button that does the work