18 mm I think.
You have to remove the pan to drain the fluid.
The towing capacity of a 2000 Dodge Dakota V6 is about 7500 pounds. The Dodge Dakota was discontinued in 2011.
The calipers are threaded and screw out.
Dodge does not have 4.3L engine. A 3.7L was not used in a 2000 Dakota. So no.Dodge does not have 4.3L engine. A 3.7L was not used in a 2000 Dakota. So no.
howdo you change the front axel of a dodge Dakota 2000 4x4
Try the 2000 Dodge Dakota CD player. I hear it fits nicely.
Should be at the bottom or rear of radiator or remove lower radiator hose
Yes. as far as I know.
how to remove a door lock cylinder on 2000 dodge neon
Yes. A 3.9 v6 engine from a 1995 Dodge Dakota will fit into a 2000 Dodge Dakota with a 3.9 v6 engine. You will have to swap the intake and exhaust manifolds along with all sensors and fuel rail though.
There is no difference in a 1995 dodge dakota with a 3.9 v6 engine and a 2000 dodge dakota with a 3.9 v6 engine and you can exchange the newer engine with the older one.
Dodge does not use inertia/reset switches.
You remove the compressor and replace the belt with one for a truck with out ac
inside of motor
It is on the pump, in the tank.
A 2000 Dodge Dakota can purchased from many local used car dealers. There also websites that the car can be purchased from. Among them are Amazon, and eBay.
Remove the wheels, take out the bolts holding the calipers on, depress the pistons in the calipers all of the way and then remove the calipers. Be sure to use the anti-squeek shims and grease in the new pads
What size engine?