answersLogoWhite
Car Stereos and Speakers
Dodge Caravan
Lincoln Continental

How do you remove the components to install a CD deck in a 1998 Lincoln Continental and where is there a harness to plug in?

555657

Top Answer
User Avatar
Wiki User
2015-07-15 19:52:33
2015-07-15 19:52:33

You need to get a book on your car available from any parts store. You will need to get an adapter harness to tie into your vehicle's harness from a car audio store. About $20.00.

Actually,I do not think there was a Chiltons or made for the Lincoln (At least I haven't found one in 5 years) Best place to look for free info was at Crutchfields at WWW.Crutchfield.com

1

Related Questions

User Avatar

how do you change a oil pan on a 1998 lincolncontinental with a4.6 engine

User Avatar

it is in the tank if you can drop the tank your self than you should be able to do it your self.

User Avatar

I took mine in to Uhaul to have them install a tow bar and light harness. Mine didn't come with a light harness, they had to install one.

User Avatar

Just get a wiring harness form e-trailer for about $30 it is easy to install has instructions with it. Wayne

User Avatar

If you are looking to install an aftermarket stereo in you Saturn it is easiest to buy the factory wiring harness adapter from your local audio components retailer and not hack off the factory plug. The harness adapter has all wires identified and is included for free if you buy your stereo from Crutchfield.com. good luck

User Avatar

take out the center bolt which is the linkage, then take out the 3 bolts that keep it in place and remove the motor, reverse to install.

User Avatar

You can buy a speaker harness. An adapter that connect the positive and negative from the speaker into the stock harness.

User Avatar

Yes depending on if you have on star or not requires different harness

User Avatar

To install an aftermarket CD player in a Toyota Corolla a new wire harness is needed that corresponds with the replacement player. The old radio needs to be removed and the harness will need to connect to the cabin harness. Then the new CD player can be installed.

User Avatar

this must be done with a specific wiring harness kit in my experience most shops don't evern know thios kit exists you can get it at crutchfield. the reason iot takes a specific kit is because the amplifier for the stereo controls more than just the radio it also controls many of the electronics in the car. Lincoln has obviously done this so that when the radio goes out you must purchase another 1200 dollar head unit from them i think that this kind of crap from auto manufaturers should be illegal hope this helps out

User Avatar

the radio owners manual that came with it, a install harness with instructions 2 hours,twist connectors, and understanding.

User Avatar

for the removal, pull of the upper radiator sight shield, make sure that the headlamp switch and the ignition switch are turned off, raise the headlamp assembly retainers by pushing rearward and then pulling up to save time. disconnect the headlamp assembly wiring harness and remove the headlamp assembly, install just do the reverse.

User Avatar

U would have to get ford radio removal keys and remove the radio and then u would have to buy a dash kit and a wire harness for ur ford zx3 install the kit wire ur harness to the pioneer it should be color coded and install. Now some of the focus harness looks like it is too small to work in the radio harness but it will fit even though it is smaller

User Avatar

buy a module and install it inline in your wiring harness

User Avatar

Install the motherboard first. The drives will have wiring harness to connect to the motherboard.

User Avatar

Remove the inside door panel of your 1988 Lincoln Town Car. Remove the wiring harness from your window motor. Remove the window motor retaining screws. Reverse the process to install a new window motor.

User Avatar

Make trip to your local auto parts store. They have or can get you a harness that plugs in to your harness. No cutting, soldering or taping. The connections are weather proof. Should take you all of ten minutes to install. They average in price around $30. Can't beat it!

User Avatar

Remove the wiring harness from the back of your 1986 Lincoln air conditioning blower motor. Remove the blower motor retaining bolts. Remove the fan on the front of the blower motor. Reverse the process to install the new blower motor.

User Avatar

Draw a scetch of the belt path first first. Remove the 4 bolt pully that will not allow the removal of the belt. Install new belt and replace pully.

User Avatar

there is an external amp in your trunk, i suggest calling a pro and finding the proper connection. other than that, re wire each speaker and go from there ... good luck


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.