Do nothing. There was no such thing in 1967.
the crankshaft sensor is above the oil filter on my 00 neon. it has one 10 mm bolt that needs taken out to remove the sensor
The crankshaft position sensor on a 2005 dodge caravan is mounted on the top side of the bell-housing.
CRANKSHAFT POSITION SENSOR The crankshaft sensor is located on the passengers side of the transmission housing, above the differential housing Crankshaft Position Sensor The bottom of the sensor sits above the drive plate REMOVAL Disconnect electrical connector from crankshaft position sensor. Remove sensor mounting screw. Remove sensor. INSTALLATION Install sensor and push sensor down until contact is made with the transmission case. While holding the sensor in this position, install and tighten the retaining bolt to 12 N·m (105 in. lbs.) torque. Connect electrical connector to crankshaft position sensor.
The answer is yes.
The crankshaft position sensor on a 2005 dodge grand caravan is mounted on the upper side of the bell housing and can be easily accessed from the top.
The crankshaft position sensor on a 1998 3.0 dodge caravan is located on the top of the bellhousing towards the firewall.
CMP : camshaft position sensorCKP : crankshaft postion sensor.CMP : camshaft position sensorCKP : crankshaft postion sensor.
there is none
The crankshaft sensor is located directly above the oil filter housing by the alternator.
There definitely is a crank position sensor on a Neon
The crankshaft position sensor is located on the rear of the engine, on the driver's side just below the distributor.
Yes, in the side of the block.