Geo Tracker
Timing Belts and Chains
Pulleys
How do you remove the crankshaft pulley on a 1992 Geo Tracker with a broken timing belt?
Wiki User
2009-11-04 20:38:05
Best way is to use a 3/8 impact wrench, with a 17mm deep-well
socket. If you dont have this equipment take it to a shop.
Related Questions
Asked in Auto Parts and Repairs, Chrysler PT Cruiser, Crankshaft Sensors, Pulleys
How do you remove the crankshaft pulley in a Chrysler pt cruiser?
The crankshaft pulley on a PT Cruiser bolts on. After removing
the vehicle belt and pulley bolt, use a pulley puller to break the
pulley loose and remove it.
Asked in Honda Passport
What tools do you need to remove the crankshaft pulley pn 1995 Honda Passport?
What tools do you need to remove the crankshaft pulley on a 1995
Honda Passport?
Asked in Chrysler Sebring, Pulleys
How do remove a 1996 Chrysler damper pulley?
Depending on engine displacement in general remove belt-s then
bolt holding pulley to the crankshaft then using a puller remove
the pulley, when installing use a installer not a hammer to put the
pulley on the crankshaft.
Asked in Chevy Tracker
How do you remove crankshaft pulley on 2000 Chevy Tracker 2.0?
use an impact and it will break the bolt lose. You will have to
mod or buy a tool to torque it down to spec
Asked in Auto Parts and Repairs, Chevy Chevelle
How do you remove a crankshaft pulley on a 67 Chevelle?
The crankshaft pulley unbolts from the harmonic balancer. The
harmonic balancer can be removed from the crankshaft with a 3 bolt
puller.
Asked in Auto Parts and Repairs, Toyota 4Runner, Honda Civic EX, Pulleys
How do you repair a crankshaft pulley for a 98 Saturn SC2 DOHC?
u need to buy new pulley then, remove serpentine belt from
engine remove bolts that hold pulley to crankshaft remove pully
instalation is exact opposite of removal
Answer
u need to buy new pulley then, remove serpentine belt from engine
remove bolts that hold pulley to crankshaft remove pully
instalation is exact opposite of removal
Answer
u need to buy new pulley then, remove serpentine belt from engine
remove bolts that hold pulley to crankshaft remove pully
instalation is exact opposite of removal
Asked in Chevy Caprice Classic, Chevy Impala
Do you need to remove camshaft pulley to get to distributor cap screws on 94 caprice?
Remove crankshaft pulley& ballance
Asked in Car Computers and Sensors, Mazda Trucks
Where is the crankshaft sensor located on a Mazda B2500?
Hello!
The crankshaft position sensor is located behind the crankshaft
pulley,on the left side facing the front of the car.It is difficult
to see and to remove it you need to remove the crankshaft pulley (
radiator,belts,.... )
Asked in Nissan Pathfinder, Nissan Altima
How do you remove crankshaft pulley bolt from a Nissan Pathfinder is it right or left hand thread?
1998 Nissan pathfinder crankshaft pulley bolt is right
handed.
Asked in Chevy S-10
How do you replace the crankshaft pulley on a 1991 Chevy S-10 4.3L?
The pulley alone unbolts from the harmonic balancer (aka
vibration damper). It's the harmonic balancer that requires a
special puller to remove it from the crankshaft without doing any
damage.
Asked in Auto Parts and Repairs, Pulleys
What puller is used to remove crankshaft pulley?
Depends on what type of vibration damper (crankshaft pulley) you
have. Your local auto parts store probably has the one you need and
can rent it to you.
Asked in Cars & Vehicles
How do you take the pulley off the crankshaft on a vauxhull frontera 2.2 diese l turbo?
Remove bolt, and use a harmonic puller to remove pulley.
Asked in Cars & Vehicles, Pulleys
How do you replace a crankshaft pulley?
remove center bolt and use the required puller
Asked in Ford Falcon, Pulleys
How remove crankshaft pulley on Corvette?
it should be on the instructions or when you get the car they
should tell you
Asked in Buick LeSabre, Crankshaft Sensors
How do replace crankshaft sensor on 1997 le sabre?
Remove belt, remove crankshaft bolt with air impact tool, remove
balancer pulley with a balancer puller. Then you will be able to
get to it.
Asked in Fiat, Fiat Cinquecento, Fiat Punto
Where is the Crank sensor on a Fiat seicento?
Remove drivers side front wheel. Remove inner plastic wheel
arch/guard. The crankshaft pulley is now visible To the right
hand-side of the pulley is the crankshaft sensor
Asked in Auto Parts and Repairs, Mitsubishi Eclipse, Intrauterine Devices (IUDs)
Do you need special tools to remove the crankshaft damper pulley on a 1996 Mitsubishi Eclipse?
on the Chrysler engine (420a) you do need a puller and installer
to deal with the crankshaft dampener pulley.
Asked in Oldsmobile, Crankshaft Sensors, Ford Explorer Sport, Ford Explorer XLT
Where is crankshaft sensor on a 1995 Oldsmobile 3800 series II engine?
It should be behind the crankshaft pulley. You'll need to remove
the right front wheel and the weathershields to get to it. If you
only need to test the wiring, don't remove the pulley.
== == == ==
Asked in Jeep Grand Cherokee Laredo, Pulleys
How do you remove crankshaft pulley 4.0L jeep?
I need a video or diagram on How to
remove a crankshaft pulley from a V6 4.0L jeep
it looks like my coolant is leaking because the seal needs
replaced. Have you ever or is there something I'm missing
Asked in Lexus GS, Lexus ES
How do you remove the crankshaft pulley in 1994 Lexus gs300?
Undo the crankshaft pulley bolt { anti clockwise } Then you will
need a good strong puller to remove it.
or try to move it by tapping the back of if fairly hard until it
comes off.
Asked in Toyota Camry
Where is the oil pump on a 99 Toyota Camry?
You have to remove the timing belt and the crankshaft pulley if
you want to get access to the oil pump. The oil pump itself is just
behind the crankshaft pulley.
Asked in Acura Vigor, 1995-1999 Dodge & Plymouth Neons, Honda Civic DX, Pulleys
Is the crankshaft pulley supposed to turn left as you are trying to remove the bolt off the pulley on a 1992 Acura Vigor?
yes it turns and it is very hard to remove without the proper
tool, you need to go to your favorite auto part website and look
for a crankshaft pulley removal tool
Asked in 1995-1999 Dodge & Plymouth Neons
How do you remove the crankshaft pulley on a 1997 dodge neon?
You need to remove the bolt, insert the special tool in the
hole, and install a three jaw puller to pull the pulley off.
Asked in Toyota Cressida, Honda Civic DX
What direction do you turn the bolt on the crankshaft pulley to remove it?
Most crankshaft pully bolts on European engines turn anti
clockwise to undo them.
Asked in Kia Sportage, Pulleys
How do you remove crankshaft pulley without special tool?
put the car in drive and crankshaft wont turn anymore. then you
can take off the bolt