answersLogoWhite
Ford Ranger
Chevy Impala
Ford Ranger XLT

How do you remove the door panel on a 1998 Ford Ranger?

666768

Top Answer
User Avatar
Wiki User
Answered 2010-04-17 01:18:47
Remove the two screws in the in the handle panel. Pull out on the handle panel to remove it from the two clips at top. Remove switches out of panel. Remove screw out of bottom of door panel, located at the rear of the carpeted kick plate. Unscrew the tip off of the lock mechanism. Lift up on the entire panel, the panel should come off.There is also one screw behind handle panel that has to be removed. The screw at the bottom of the door panel is not easy to locate. It is actually in the carpeted kick plate. You will have search around with a small screwdriver and a strong light to to locate this screw.
001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Your Answer

Related Questions


The 1998 Ford Ranger door panel has eight retaining clips. Pry outward on each retaining clip. Remove the two door handle screws.


On a 1998 Ford Ranger : Open the drivers door and in the drivers end of the dash you will see the removable plastic fuse panel cover


you have to go to the car fix to remove it



How do you remove the instrument panel in a 1998 Ford Expedition 5.4 Engine


Do not get involved take it to a garage they are a piece.


On a 1998 Ford Ranger : In the fuse panel in the drivers end of the dash : ( mini fuse # 8 is a 10 amp fuse for the right headlamp and fog lamp relay )


How do your remove the dashboard on a 2000 Ford Ranger?


How do you remove the flywheel on a 1999 ford ranger


My Ford Ranger is a 1998 4.0 ltr V6.


What is the timing for a 1998 ford ranger 2.5l


remove the window handle, remove screws from armrest, remove the inner door handle and the screw on the lower rear of the door panel, lift the panel upwards to remove from the slots along the bottom of the door.


Removing the door panels on a 2000 Ford Ranger is easy. All you have to do is snap out the old panels by unscrewing the bolts and screwing in the new ones.


passenger side floorboard on the firewall close to the kick panel


Remove all the screws. (There are 2 under the "Close Door Handle" Then, simply lift up the panel. David


what is the axle gear ratio for a 1998 ford ranger 4x4 4.0l?


No, the cab was lengthened in the 1998 model year.


need locations of steering column brackets on a 1998 ford ranger


Open the drivers door and in the end of the dash you will see a removable plastic fuse panel cover , the fuses are behind the cover


I have a 2000 Ranger, and on mine the lens is made of plastic. To remove it, I squeeze the lens just enough so that the tabs will snap out.


YOU MUST REMOVE DOOR AND WINDOW HANDLES, ARM REST AND THEN YOU CAN POP THE DOOR PANEL WITH A LARGE SCREWDRIVER OR A REMOVAL TOOL FOR THE PASTIC PUSH IN RETAINERS


In the right front passenger footwell , behind the kick panel


In the right front passenger footwell , behind the kick panel


You shouldn't have to. All you need is a DIN removal tool from any auto parts store.


According to the 1998 Ford Ranger Owner Guide : The fuel pump shut off switch ( inertia switch ) is located in the front passenger foot well , behind the kick panel * the kick panel is the interior trim panel , in front of the front door , beside the passengers feet



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.