Removing a door panel to replace a side mirror is usually easy in most cars. Most cars have clips and screws only holding the door panels in place. Remove the clips, then the screws and the door panel will come right off.
Remove the inside door panel of your Chevy Cavalier. Remove the drivers side mirror wiring harness, if the mirror is electric. Remove the drivers side mirror retaining bolts. Reverse the process to install the new drivers side mirror.
In order to replace the drivers side mirror on a Buick Rendezvous, you will need to remove the door panel. You will have to disconnect the electrical connector and you will be able to remove the mirror and place the new one on.
To replace the driver's side mirror on the 2003 GMC Envoy, first remove the interior door panel. Then, remove the mirror connection cover inside the panel as well. Unscrew the screws holding the mirror to the door. Remove the wiring and replace the mirror with a new mirror. Replace the screws and place the door panel back onto the door.
Remove the panel on top of the door panel it's a little access panel that clips on. After doing so their are 3 ten milimeter bolts hoding the mirror to the door. If it's a manual mirror on the drivers side then there will be one screw holding the lever in the panel and u have to remove that screw to remove the mirror.
Remove inside door panel, remove mirror assembly holding bolts, unplug electrical connection and reinstall.
remove drivers inside door panel and there are 2 or 3 bolts that hold mirror on from the inside after you diconnect the wire harness if it is a power mirror
how i do replace the drivers side mirror for a 2002 Chevy venture with taking off the inner door panel
Remove the 1999 Chevrolet Cavalier inside door panel. The mayor assembly will be visible. Remove the retaining bolts and wiring harness. Reverse the process to install the new mirror.
Remove the inside door panel. Remove the wiring harness from the mirror. Remove the mirror retaining bolts. Reverse the process to install the new mirror.
remove the plastic panel and there are 3 ten mm nuts remove and replace mirror.
remove door panel. disconect electrical connections and unbolt the mirror using a 10mm socket
Usually, to replace any power mirror, you must first remove the inside door panel. From there you should have access to the rear of the mirror. There has to be some screws (usually 3 screws) holding the mirror in place. Also follow the wires from the mirror to where it is connected and disconnect.