Want this question answered?
Jaguar or Ford Dealer
take screws out and pull door trim off
* Remove the side view mirror trim cover * Remove the inside door handle cover * Pry out the armrest switch control plate and disconnect the electrical connector * Detach the retaining screw located behind the armrest trim panel * Remove the remaining door panel retaining fasteners * Once all of the fasteners are removed detach the trim panel,disconnect any electrical connectors and remove the trim panel from the car by gently pulling it up and out
The inside door trim is held in place by several retaining clips. Pry outward on each retaining clip to remove the trim.
Have to remove the doorliner from the rear door. Remove the 2 screws that hold the black trim that covers the lamps. Then you can remove the clear cover and access the lamp.
You have to take the inside door trim out of the door, then there will be some bolts on the inside of the door remove the nuts and your door latch will come out.
to remove the dash trim around the stero unit, find the screws under the ac/heater controls that are on the trim, to remove the rest of the trim you need to remove the plate around the shifter too, so take the screws out of the shifter's plate. remove the rest of the screws around the trims and you should be able to pull the trim out of place.
remove the inner door panel, you can access the bolts from the inside of the door.
Remove the 4or5 screws along the top of the trim plate, the trim plate should pull off,the headlight switch is attached to the trimplate.
It will not take long at all to remove door trim from a Renault Menage. All you have to do is remove the bottom 10 mm bolts on the door, un-clip the door lights, undo the plastic trimming from the clips, unscrew the door cover and then remove all trimming.
Remove the door bezel.Remove the window switch.Remove the door pull trim bezel.Remove the 2 7MM bolts behind the door pull trim bezel.Using a door panel tool, you should be able to remove the plastic clips behind the door panel.
Remove the screws, pull out with a trim puller.