It simply pulls off. There are two square moldings on the foot rest that align to two square posts screwed to the floorboard. Be careful when restoring the footrest, be sure to properly align the posts.
In a 1988 Pontiac Grand Am you will find the clutch slave cylinder located on the flywheel. You will need to remove the hush panel from the driver's side foot well to gain access to the clutch slave cylinder.
under the left foot rest bracket on the driver side under the dash
Passenger side foot well. Remove small black plastic panel nearest driver's side. Then remove larger panel. You will need a Phillips head screw driver and to lay newspaper on the carpet to catch any dust.
set in the passengers side of your car to the right side of your right foot is a plastic pannel remove it you will see the bypass switch push the button in to reset
It's in the driver side foot well. It's in the driver side foot well.
It is quite simple to remove the Nortel M3920 foot stand. All you really need to do is remove the screws.
6 foot tall
Foot
There is a foot switch on the driver's floor by your left foot.
It is between engine and firewall about a foot from centre on driver side
there should be one under the hood and under the kick panel, or remove the trimming that curves down to the floor next to your foot on the driver side
The short bolt torque specs for the head gasket of a 2000 Pontiac Sunfire is 43 foot pounds. The torque specs for long bolts is 46 foot pounds.