ideally you need a tool which holds the pulley that the fan is bolted too but if you don't have one you can put two 8mm bolts around 40mm in length into the two holes in the pulley, put a large screw driver between them to hold the pulley while you put the spanner on the fan nut and loosen anti clockwise, it can be a bit tricky as you don't want to slip with the screw driver but it is possible and i have done it this way a few times, i certainly don't think it can be classed as very difficult as previously answered by some one, ideally remove the plastic cover that lies over the top of the fan cowling, 3 torque bolts one either side and one in the middle, also for future reference the drive belt pulley has a hole the size and shape of a 3/8th ratchet and once located push the ratchet to back off the adjuster working against its pressure to tighten the belt no bolts to undo really simple.
Happened to me in France, you can still move the van but beware of overheating...
Need to know how to remove heater fan on 1999 ford e 150 van with small v6 engine
The serpentine fan belt layout for a Ford Transit can be obtained from the car manufacturer. This information will be presented to you upon inquiry.
how do you remove a fan blade from a 1998 ford explorer
engine fan has treads backwards to tighten while engine is running...it would work loose if it did not. turn it to tighten it like a regular bolt to remove it hope this helps
is the fan belt broke or loose
How to remove fan clutch on 2003 ford explorer
you have to have fan clutch wrenches
on the radiator fan
remove the top fin then remove the two 8mm bolts then remove the support brackets on radiator lean it forward pull strait up on the shroud the remove the fan with the pneumatic tool finally remove the 15mm bolts holding the shroud to the engine
do you have to remove fan shroud to access thermostat housing on a 1997 2.3L ford ranger
No