Want this question answered?
what fluid??
It's on the front valve cover. The trick is you have to first remove the "breather chamber" by removing the 2 bolts on top. With the breather chamber cover off, you'll see the PCV valve screwed into the valve cover.
the EGR valve is just under the distributor cap
The drier is on the drivers side directly behind the headlight. The expansion valve is located behind the glove box inside of the evaporator case.
located in the top of the drivers side valve cover between the front and mibble coil.
Remove the bottom hose from the evaporater at the firewall, pull out the expansion valve, i highly recommend flushing out the system to remove excess sludge. Replace the valve and the hose.
The expansion valve is located in front of the evaporator core. You must remove the housing to access it.
You must remove the evaporator case from behind the glovebox and disassemble it. The expansion valve is mounted to the evaporator.
YOU MUST REMOVE THE EVAPERATOR CASE FROM INSIDE THE TRUCK ON THE PASSENGER SIDE AND YOU WILL SEE THE EXPANSION VALVE.
It is attached to the back wall of evaporator. You have to remove the glove compartment, blower unit and evaporator to get access to the expansion valve.
The PCV valve on the 2001 Acura TL is located on the top of the rear valve cover. It's easy to replace - simply pull it out by hand and remove the attached hose. You have to remove the black plastic cover on top of the engine to access it.
Expansion valve is located on the A/C Evaporator Core. Most of the times you have to remove the whole dash to reach it/ replace it. Good luck.