Not all the fan clutch nuts are left hand thread some are right handed. It states which type you have on the top of the radiator shroud.
AnswerPut a rag on the pulley and wrap your chain wrench around it to hold on and keep the pump from turning when you put your monster adjustable wrench on the clutch and turn it off. Sears sells a strap wrench (Part #45570) that works really well for holding the fan pulley.How do you remove the rotors on a 1992 ford aerostar?"
What exactly do you want to know about "Air conditioning clutch on a 94 ford aerostar van?" How to replace? What engine do you have, etc.?
First remove the accessory drive belt- then loosen the large nut that attaches the fan clutch assembly to the water pump pulley being careful to loosen the nut clock wise not counter clockwise (It is a left handed thread)-now you can remove the fan to clutch bolts so you can separate the clutch assembly from the fan.
Yes.
Remove the battery cables. Remove the battery tiedown. Remove the battery from the Aerostar. Reinstall in reverse order.
If your Ford Aerostar is overheating and losing water, it may be a bad radiator. You need to take your car in to get serviced.
How to remove fan clutch on 2003 ford explorer
after you remove the fan and fan hood remove the belt and the alternator. you then remove the 6mil bolts and your water pump should come free from the timing chain cover.
you have to have fan clutch wrenches
remove headlight switch
How to replace a clutch interlock switch on a 1997 Ford Ranger XLT
Ford Aerostar was created in 1986.