First, the neg. battery cable should be removed from the battery, the appropriate belts should be removed, the rad should be drained to at least as low as the bottom of the water pump's lowest point, and the top rad hose should be removed.
Then the fan shroud bolts should be removed.
The fan and clutch should be attached to the water pump hub by a large threaded nut.
If the fan clutch itself needs to be dissassembled, or if the water pump pulley bolts can't be accessed with the fan present, then wedge a prybar or long screwdriver between the pulley bolts to prevent the fan turning and, using the appropriate size wrench, turn the large nut counterclockwise to loosen and remove it.
If the water pump pulley bolts can be accessed then remove them and pull out the fan assembly and the fan shroud together.
Installation is the reverse of removal. Don't forget to put the shroud and fan back in together.
Does anyone know how to take off a radiator fan clutch from a 1998 Dodge Dakota 3.9 V6
Rotate the switch on the rod for the master cylinder for the clutch. Take out the retaining clip. Remove the clutch pedal position switch from the rod. Disconnect the electrical plug. Plug the new clutch pedal position switch in and installation is the reverse of removal
How do you replace a slave cylinder on a 1995 dodge neon clutch
you dont
Clutch switches are usually located at the top of the clutch pedal.
It is a lot cheaper and takes a lot less time if you just change to whole unit.
YesYes
It is not adjustable.
It varies with what part of the country you live in. Call a couple of local garages for estimates
How do I get to the flywheel bolts on a 98 dodge dakota to remove a transmission
A 2003 Dodge Dakota does not have a cabin filter.
If Possible Get rid of your Clutch Fan and go Electric! But to answer the question, remove serpentine belt and use a strap wrench to stop clutch from spinning when you try to remove fan clutch nut from water pump!