more than likely you have to jack the front of the car up and crawl underneath and pull a plastic guard down and then you can get to the fog light bulb from behind, you don't pull the light out of the front facia.
The Dodge Charger is a car made by Chrysler, since 1964. To change the headlights on it first remove the bumper, headlight bracket and replace the bulb, then re-install the bracket and bumper.
Just the bulb on the new ones? pop the hood and find the back of the bulb you need to change. they can be kinda tough to turn, but a 1/4 turn will unlock the bulb and it can then be pulled out. then simly unplug the old bulb and replace it.
remove the old bulb and keep the new one instead
1/4 turn to release the old bulb.
Pull up on the tabs and remove the bulb.
remove tail light, remove burnt bulb, replace burnt bulb, test if it works, then put tail light back on....
you have to remove it from the outside.after you remove the screws press the bulb and turn it to the left to remove.
Behind the instrument Cluster. Or remove it and replace the Cluster.
Lower the tailgate and the screws will be on the bedside. Remove the screws and pull the light bulb housing out. From there you should be able to see how to get the bulb out of the housing.
You probably don't remove the cover. The bulb is more than likely accessed from the back side. Read you owner's manual.
# Remove the screws and detach the tail light housing # Rotate the bulb holder counterclockwise and remove it from the back of the housing.Press the tabs and pull the bulb from the holder
It is very easy to change the license plate bulb in a 2001 Dodge Intrepid. You will need to remove the tag and then unscrew the light cover. After the cover is off, unscrew the light and replace with a new one.