0
you have too take off the wheel then the brakes, then you have to remove the 3 bolts on the back of the wheel assembly and lightly take a mallet and tap the wheel assembely out. and it all just pulls out after that.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
How do you remove the front intermediate shaft on a 2001 dodge ram?
knock it out (very carefully) from the inside of the front diff, or weld a slide hammer to the out board side and slam slam slam . ROBERTO IN KODIAK
Where is tcm on 2001 Dodge Caravan?
It is in front of the drivers front tire. You have to remove the inner fender liner to access.
What size wrench is needed to remove front axle nut on 2001 dodge durango 4x4?
32mm
What size is the front axle nut on a dodge ram 2001 truck?
The axle shaft nut requires a 1 and 11/16 inch socket.
How do you change the clutch on a 2001 Dodge Ram 1500?
Raise the front end of the 2001 ram 1500. Remove the drive shaft and transmission. Unbolt the clutch, and check the pressure plate for wear. Using an alignment tool, install the new clutch. Reverse the procedures to finish the installation.
How do you remove the front bumper on your 2001 Dodge Neon SE?
Haynes repair manual, Dodge Neon 2000 thru 2003. Book #30036
What is the front shoulder room in the 2001 Dodge Durango?
The 2001 Dodge Durango has 57.3 in. of front shoulder room.
What is the front leg room in the 2001 Dodge Durango?
The 2001 Dodge Durango has 41.9 in. of front leg room.
What is the front head room in the 2001 Dodge Durango?
The 2001 Dodge Durango has 39.8 in. of front head room.
What is the front hip room in the 2001 Dodge Durango?
The 2001 Dodge Durango has 56.7 in. of front hip room.
How do you remove front car seat in a 2001 dodge durango?
Should be secured by bolts in each corner of seat
Where is the crank shaft sensor 2001 Hyundai sonata 4 cylinder?
its on the front off the engine you must remove timing belt to replace it
