I believe that caliper is held with 10mm bolts. Remove caliper, then caliper mounting frame, then rotor will come off.
How do you remove the rear brake rotor on a 2005 Dodge Ram 2500?
They have to be pressed out mechanically. Mitsubishi blew it on this design.
first take off frontwheel then take off brake caliper then rotor will pull right off .
Remove the tire and wheel from your 1995 Chevrolet K 3500. Remove the front brake assembly. Tap on the brake rotor with a hammer or mallet until it becomes loose. Slide the brake rotor off.
Remove the tire and wheel from your 1995 Chevy. Remove the brake assembly. Tap on the brake rotor with a mallet or hammer. The brake rotor will slide off.
Remove the wheel and tire assembly and the brake caliper then the brake rotor will slide right off.
The front brake rotor, on a 2004 Chevrolet Colorado, can be removed by first removing the wheel. Next, remove the brakes. The rotor will slide off
Remove caliper, pull rotor off hub, push new one on.
No, the rotor will come off with out the hub. After the brake caliper is off the only thing holding the rotor is rust. Hit between the studs with a hammer and it will come off.
Remove the brake caliper and hang it out of the way, then thread 2 8 mm bolts into the holes provided on the disk. Screw them in and the brake rotor will come off.
Jack up the front of your 1991 Mitsubishi Eclipse. Remove the brake pad assembly. Loosen the brake rotor by tapping on it with a hammer or mallet. Slide the brake rotor off. Reverse the process to install the new brake rotor.
nb,