Want this question answered?
I have a drivers side (front) speaker that went out. I think the problem is a speaker connection. How do I remove the window crank (not power windows) and then the whole inside panel?
in front of the gas tank, drivers side, bolted to the floor.
Under the car , in front of the drivers rear wheel.
pry up the cover from the outside of the handle and remove the 7 mm screws front and back
The 1990 Chevy Corvette front drivers side speaker cover will need to be removed. Remove the speaker retaining screws. Remove the wiring harness from the back of the speaker.
In front of the wheel well, just the other side of the drivers feet.
The transmission filter is on the drivers side of the car on the front of the transmission. You may need to remove the air cleaner to get a good turn on it. Good luck. --------------------------------- Automatic tranny has a filter. Manual tranny does not
I actually got my front windows tinted today... According to the guy that tinted them, the back windows are 17%... He did my front windows with a 20% and they match perfectly! I'd say they are between 17-20% for the back windows.
It is in front of the drivers front tire. You have to remove the inner fender liner to access.
Remove drivers seat by lifting tab on front of seat.
Depending on year, your horn is most likely located in the drivers side fender well. Lift and support the front end of the car, and remove the drivers front wheel.... remove the drivers side front inner fender and look in front of where the wheel was, looking towards the head light. You will see the horns right there bolted to the outside of the frame rail...
remove the door and window crank handles with a special tool from the parts store, Then all of the screws you can find esp at the corners. Then the retainers with a special tool around the sides and botton fo the door.This is not an easy job.