First you remove the caliper by using a 3/8 socket style alen key. This may vary so check a couple parts stores by the year of your car and they should tell you what size you need. The bolts are in-behind facing the motor. There are 2 of them and you'll need to pull on them with a pair of plyers to get them far enough out after loosening them enogh. Jar the caliper out with a hammer but put a cloth in front or use a rubber mallot to push it off towards the front of the car. Once that's done the giant bolt in the middle of the rotor is all that's left between you and the new shiney rotor you want to install. This will require a 1 1/8 socket. Make sure it's a deep socket as you really need the distance to get that bugger out. Once it's off work backward. I just did mine tonight so enjoy I know I sure didn't.
answeron the sunfires i did i did'NT need to take the axle bolt offRemove the front tires, from your Pontiac Grand Prix. Remove the brakes and rotors. Unbolt the axle from the suspension. Remove the axle.
Remove the front bumper fascia.Unplug the horn electrical connector and remove the bracket bolt.
The 1997 Pontiac Sunfire front bumper is held in place by six retaining clips and for retaining bolts. Remove the retaining bolts and pry outward on each retaining clip.
* Remove the front bumper fascia * Unplug the horn electrical connector and remove the bracket bolt
* Remove the front bumper fascia * Unplug the horn electrical connector and remove the bracket bolt
* Remove the front bumper fascia * Unplug the horn electrical connector and remove the bracket bolt
hit it with a hammer on the front out side edge it should just come loose
Yes , a 1995 Pontiac Sunfire is a front wheel drive vehicle
yes
4x6
how do you remove front rotors from a chev 2004 silveraldo crewcab not 4wd
I believe that's a 5/16. or possibly 3/8 Allen.