Grand Prix GTP
Pontiac Grand Prix

How do you remove front axle from a Pontiac grand prix?

123

Top Answer
User Avatar
Wiki User
Answered
2014-06-20 20:35:09
2014-06-20 20:35:09

Remove the front tires, from your Pontiac Grand Prix. Remove the brakes and rotors. Unbolt the axle from the suspension. Remove the axle.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


The front wheel bearings, of a Pontiac vibe, can be replaced by first removing the front wheel. Next, remove the axle end cap. Remove the bearing and reverse the process to install the new bearing.

Yes, if you remove the front axle first.Yes, if you remove the front axle first.

On 2005 and up you will need to remove the axle nut to pull the rotor.

Thunderbirds never had a front axle

Either remove the trans, or remove the front axle on a 4x4.Either remove the trans, or remove the front axle on a 4x4.

You have to remove the front axle assembly for enough room to remove the oil pan.You have to remove the front axle assembly for enough room to remove the oil pan.

You will have to remove the front axle assembly to have enough clearance to remove the oil pan in vehicle.You will have to remove the front axle assembly to have enough clearance to remove the oil pan in vehicle.

if you are refering to the large axle nuts, they are 36mm. my 2002 i used 1 5/16 which converts to 33MM

I'd need to know if you had a solid front axle or a double wishbone independent front suspension in order to answer this.

Probably a breather pipe for the front differential.

No fasteners holding rotor on. But you must remove caliper and caliper mounting bracket first.

How do you remove the front axle on 1998 Honda 450 foreman?Read more: How_do_you_remove_the_front_axle_on_1998_Honda_450_foreman

hoew do you remove a c v axle from a 97 isuzu rodeo front right

Can you show me pictures on a dodge neon 1998 on how to remove and replace a front axle.

How do you get the axle out to change the boots on the cv joints

To remove the front axle from a Kawasaki 2510 mule, refer back to owner's manual. Your owner's manual should have this type of information, if not, contact the dealership.

Take the tire off remove the axle nut remove the pinch bolt and remove the ball joint from the spindle Push the end of the axle through the spindle"center of brake rotor" that might require a hammer and punch, be careful not to ruin threads carefully pry the axle from transmission, this may take some force while holding the axle and moving the rotor/spindle out of the way, pull the axle out reverse to install, making sure to properly torque all bolts and nuts to the recommended specs. failure to do so can result in an accident. Use thread lock on the ball joint pinch bolt for added safety.

remove axle nut in center of wheel before jacking it up then raise and support vehicle on stands and remove front tire then caliper and rotor then rotor mounting bracket remove bottom ball joint from the front spindle and you should be ready to pull the axle out then just reverse these steps to reinstall. hopefully this helps you

Jack the car up, loosen the bolts and remove the wheel. The next thing is to loosen the nuts joining the axle to the stath then remove the axle.

how to remove, or replace front right axle escape 2004

you have to take a wrench and pull the bolts off


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.