How do you remove the front rotors on a 95 Nissan PU to replace brake pads?
with a 14mm wrench
Jack up and safely support front of vehicle. Remove front wheels. Remove front brake calipers and hang them with wire so not to damage brake hoses. Remove brake caliper brackets. Remove brake rotors. Rotors may need a little persuasion with a large hammer as they may be stuck/rusted in place. Reverse order to install rotors.
Jack up car, secure on jackstand, Remove wheel, remove two mounting bolts that secure the calipers. Slide calipers out of rotors and hang caliper in a way not to strain brake hose. Pull Rotors off and change for new ones. If you want to change pads, Remove two retaining bolts on the caliper that hold the pads, remove and replace them.
To replace the pads, just remove the calipers, retract the pistons, and set nre pads in place of the old ones. To replace the rotors, remove the old ones and set new rotors in their place. Before driving the vehicle, repeatedly depress the brake pedal several times until it feels firm like it works. Make sure you spray the new rotors with brake parts cleaner thuroughly after you install them!
Remove wheels Remove 2 caliper mounting bolts Slide caliper off rotors Rotors should slide off hub Fully retract piston into caliper body using a "C" clamp Replace inner and outer brake pads Re-Install rotors Slide caliper on rotors and re-secure REMEMBER TO PUMP BRAKES TO SET PADS AGAINST ROTORS PRIOR TO MOVING VEHICLE Remove wheels Remove 2 caliper mounting bolts Slide caliper off rotors Rotors should slide off hub Fully retract piston into caliper body…
I would suspect you have warped rotors. They can be removed an trued at any machine shop. Replace the brake pads at this time. Be sure to torque the lug nuts to factory specs. Over-tightening the lug nuts can warp the rotors. Warped rotor. Re-grind or replace. No: Bleed brakes - remove brake fluid in controlled environment to remove air - check calipars and pads also ---- The rotors are very likely warped. Either have…