answersLogoWhite

0


Best Answer

You you need to remove several small bolts on the lower part of the dashboard on both sides (most are on the bottom by your feet) as well as one inside the glove box to remove the whole dashboard. Take care of the dash vents, the one by left side of the steerling wheel has an insert inside to direct the airflow and there is one located underneath the steerling wheel that is pointed toward your feet. The speakers are located inside sealed boxes that will need to be un-bolted from the car frame to replace the speakers. You shouldn't need to cut any part of the existing grills bult-in to the dashboard to fit most newer model speakers. My speakers still had the factory speaker harnesses attached, so connecting the wires was fast and easy. MAKE sure to color code the wires from the wiring harness by the deck BEFORE you wire up the speakers, the color coding in my car was completely different than the manual or what the wiring kit stated. (PS: the speaker size inside a 1990 is 4" for the front and I used 3 way Autobans w/ a crossover and they fit fine). Putting everything back together the same way you removed it to finish everything off.

User Avatar

Wiki User

18y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you remove the front speakers on a 1990-92 Geo Prizm LSI?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you remove the front door panels to get to the front speakers on a 2000 Chevy Prizm?

http://prodactor.blogspot.com/2005/09/removing-door-panel-from-toyota.html


How do you change the speakers on a 1992 Geo Prizm?

See the answer for the 93 model if you're referring to the rear ones. If you want to replace the front ones, you have to remove the door panels.


What size are the front door speakers on a 93 Geo Prizm?

The door speakers in Geo Prizms From 1993-1997 and possibly newer are 4in. and the rear speakers are 6.5in.


How do you remove front speakers for Chevy Equinox?

The Chevrolet equinox front speakers are held in place with two retaining screws. Remove the retaining screws and the wiring harness. The speakers will come out.


How do you replace the front speakers in a 1995 Geo Prizm LSI 4-dr sedan?

You have to remove the door panesl. The speakers are attached to the doors by screws. Remove the door panel, remove the screws holding the speakers in and unplug the wire connector. Go get some new ones the same size and splice connect the wires to the new connectors. Use shrink tubing or electrical tape over the splices. Put it all back together.


How do you remove front speakers on a 2002 Mazda MPV?

No


How do you replace the front speakers on a 1992 Buick road master?

Front speakers are in the door. remove screws on the door panel, then remove the panel and you'll see the speaker


How do you remove front speakers 1994 corvette?

Remove the floor sill covering, it has 5 or 6 screws, then you can access the speakers.......


How do you remove the front speakers from a 1989 Chevy Celebrity?

To remove the front speakers from a Chevy Celebrity: 1. Take out the screws from the speaker grills, take the grills out. 2. The speaker is held in with screws, remove them. Lift the speakers out of the dash and unplug the wire harness.


How do you install front door speakers in 2002 avalanche?

1.- remove the doors panels 2.- remove the old factory speakers


How do you remove front speakers in a Mitsuibishi Mirage?

Remove the speaker covers, by loosening the retaining screws. Remove the speaker retaining screws. Remove the wiring harness. The speakers will come out.


Change the front speakers in a ford KA?

You will need to remove the front speaker covers. The speaker covers are held in place with two retaining screws. Remove the speaker retaining screws. Remove the wiring harness from the back of the speakers. Reverse the process to install your new speakers.