Want this question answered?
behind assembly, bulb is connected with electrical clip, remove clip turn bulb counter clockwise and remove. easy as tHAT. See sources and related links below for bulb information.
On the Signal Assembly there is only ONE screw which is right on top, near the headlight. It looks like a little arm sticking out, unscrew it.Now, on the passenger's side signal assembly, pull from
Yes
I got an Isuzu Workshop Manual, January 1987. This book shows anything and Everything you ever want to know about this car. Publication No AIMI-SVC-126 Parts No. 2-90999-407-6.
The complete assembly comes off by removing 4ea screws on the outside. Then remove the small plate on the rear of the assembly to get to the bulb.
The bulb can be acessed behind the headlight in the center of the reflector,remove socket and pull out bulb and replace with new one.Do not touch bulb with fingers,oil from hands will shorten bulb life.
Lift the hatch. Remove the screws in the tail light assembly. Pull the tail light assembly out. It may need a gentle nudge. Now untwist the bulb assembly socket counter clockwise to remove. Replace bulb. Re assembly is in the reverse order.
open the hood unplug the bulb from the back of the light assembly and un do the metal clip, pull bulb out of replace with a new one and reinstall
There is one Phillips head screw on the top of the asseembly, close to the headlight. Remove the screw, and there will be a ball and socket connection holding the assembly in place. Gently pull the top of the assembly toward the front of the truck. Then use a long screwdriver to gently pry the bottom toward the front of the truck. Keep alternating between the top and bottom, prying it a little at a time. Eventually, the unit will pop out.
There are 4 screws located under the rubber on the edges of the headlight. These have to be removed in order to get the headlight out.
how to remove the headlamp on 2012 isuzu d-max
how to remove lock cyliner switch 1988 Isuzu pickup