There are two ten mm bolts on top in the plastic header panel which must be removed. There are two more under the bumper cover. You must remove the bumper cover to access them.
detach the bulbs and remove the clips behind the headlight assembly
it is behind the passenger side headlight assembly. you will have to remove the headlight assembly to replace it.
Remove the parking/turn signal light assembly. Take off the grill. Remove the headlight bulb. Remove the inner and outer attatching screws and upper attatching screw. Lift the headlight out.
How to remove headlight assembly on 2003 Lexus GX470
Remove the wiring harness from the back of the headlight. Remove the headlight assembly bolts. The headlight assembly will come out.
How do you remove the headlight assembly on a 2001 camaro?"
Hi, You have to remove the entire headlight assembly to get to the bulb, which is located in the back of the assembly. There are three wing nuts that hold the assembly in, and those will have to be removed. Then remove the side signal assembly first, then the headlight assembly. I have provided a link that shows exactly how this is done and where these wing nuts are. Good Luck
There is no 1998 CTS
Open the hood, remove the two locks that hold the headlight assembly in place, with the two locks removed you can wiggle the headlight assembly out and gain access to the back side of the assembly to remove and replace the headlight bulb.
Begin by removing the wiring harness from the back of your headlight. Remove the headlight assembly retaining bolts. The headlight assembly will come out.
Open the hood to the engine compartment. Remove the headlight wiring harness. Remove the headlight assembly bolts. There are four headlight assembly bolts. The headlight assembly will come out.
Remove the wiring harness from your 2000 Kia headlight. Remove the headlight assembly retaining bolts. Reverse the process to install your new headlight assembly.