first remove the bracket over the top of the light, should take a Phillips head screwdriver. second remove the upper adjustment screw bracket from the radiator frame using a needle nose pliers. Then using a needel nose plires squeeze the retaining clip on the lowere adusting screw while pulling out on the headlight.
Open the hood to the engine compartment. Remove the headlight wiring harness. Remove the headlight assembly bolts. There are four headlight assembly bolts. The headlight assembly will come out.
take a baseball bat and smash the light with it.
The headlight is an assembly. To replace the headlight, you remove the bulb from the back side. It is a halogen bulb, so do not touch with bare hards before installing.
If it is a diesel, remove the battery on the side you need to get to. Then unscrew the 2 Phillips head screws on the top on that side, and then below the battery mount there will be 2 7/16" bolts below the headlight assembly, remove those and the assembly should come out.
for a 1994 Grand Caravan (probably like the 1995) see: How do you replace the headlight assembly located on a 1994 Dodge Caravan? for a 1994 Grand Caravan (probably like the 1995) see: How do you replace the headlight assembly located on a 1994 Dodge Caravan?
Actually you can do it yourself... but you have to have a special kind of pliers (called "snapring pliers")to remove the metal retainers(2 on each side of the headlight assembly) that attach the assembly to the grille opening panel. They're cheap and you can get them at your local auto store.
pull the complete headlight assembly out and then you can get to the build in the back of the headlight.
In the headlight assembly...
Loosen the screws of the lower grill and headlamp assembly so that it can be removed from the fenders. Remove the upper grill fasteners and remove the grill. Take off the headlight housing. Remove the headlamp motor and housing. Take out the headlight. Now the fender can be unbolted and removed.
The 1995 Chevrolet Camaro headlight assembly diagram can be found in the Haynes repair manual. This book can be found at auto parts and book stores as well as your local library.
1. Open the hood of your Maxima and locate the headlight assembly. Access to the bulbs is from the backside of the headlight assembly. 2. Remove the electrical connector from the back of the headlight bulb after pressing the locking tab to release it. Pull the connector straight off and set it aside. 3. Locate the locking ring on the back of the headlight assembly and turn it counterclockwise to unlock it. Remove the ring from the assembly pull the bulb out of the headlight. Discard the old bulb and insert a new 9004 halogen bulb into the headlight assembly. 4. Install the locking ring over the bulb and turn the ring clockwise until it locks in place. Plug the wiring harness connector into the back of the new headlight bulb, making sure it snaps onto the locking tab on the headlight.
Remove the headlight wiring harness. Remove the headlight retaining bolts. Each headlight has four retaining bolts. Reverse the process to install the new headlight.