Want this question answered?
Take off the seat (by turning your key in the ignition way to the left), and the battery is right there. You then disconnect the 2 cables (positive and negative), remove the rubber strap holding it in there, and then you simply pull the battery out.
PUT YOUR KEY IN THE IGNITION AND TURN IT TO THE LEFT WITHOUT PUSHING DOWN ON THE KEY.PUSHING DOWN ON THE KEY LOCKS THE STEERING .
1996 rodeo- how to remove key from lock ignition?
Push the key into the ignition. To remove, push in, then turn towards you to remove the key. I do not know how to remove and replace the whole ignition assembly in case that was your real question.
how to remove key stuck in ignition switch in Chevy colbalt
You have to have the key to that ignition to remove it. You can get a locksmith maybe. The dealership can make you a key from your vin# definitely good luck.
Find and remove the chime.
Remove the retaining ring from the top of your 1977 Chevrolet pickup truck ignition key tumbler. Slide the ignition key tumbler out. Remove the wiring harness from the end of the key tumbler.
Use the opportunity to replace the ignition. Key needs to be in On position for removal.
The procedure is as follows: Insert the key into the ignition switch. Without pushing down, turn the key as far in the counter-clockwise direction as you can. You should hear a click sound from the front end of the seat. The seat is now ready to be removed by lifting on the front portion of the seat (the horn) and lifting upward.However, sometimes the seats can be fickle. Owners have found that the locking mechanism can be stiff and pushing down on the horn of the seat while turning the key will do the trick.
Removing a ignition lock cylinder from a 2002 ford windstar with no key
To remove the "key" ignition, insert a small screwdrived in the hole directly below the ignition in the column. You will need to have the key in the ON position otherwise the ignition will not come out of the column.