Want this question answered?
a diagram of a jeep cj-7 steering column
Yes.
it is under the dash to the left of the steering column. it is a white box with a 3 wire plug attatched
yes
hey, if you mean the the little cylinder thing in your colum, i am working and stuck on that at the moment, you have to pull your steering wheel off, take your blinker etc stuff out, then there are like 5 little holes and in the bottom of one of them there is a screw, you have to take that out and then the cylinder should pull out
either the coil or ignition control module
Buy a new one...they are like 20 bucks
it means your ignition timing is not correct or maybe your accelerating pump sytem is not function at all
The power steering pump end is straightforward. The steering box end is more difficult. When I did mine, I found I had to remove the radiator to get to the fittings, and they were so badly corroded in place I needed to remove the grill also, to get enough leverage on a wrench to turn them. While in the vicinity of the steering box, check the mounting plates that hold the steering box to the frame. They are not especially robust, and can rust and break. If you need to replace the mounting plates anyway, it might be practical to take off the steering box and drop it down below the bumper attached to the hoses, where you can get a wrench on the hose fittings.
CJ7 was released on 03/07/2008.
The Production Budget for CJ7 was $20,000,000.
all tops from 1978 cj7 to 1995 yj fit