Here is a YouTube link........ Its for a coupe, but the general idea is the same. Your car will be very similar.
http://www.youtube.com/watch?v=9UIPUD6H4Ak
take it to a body shop
remove the inner door panel, you can access the bolts from the inside of the door.
The inside door panel cannot be removed; instead, to get to the inner workings of the door remove the OUTER panel. Lift the outer door handle to expose the pins that hold the outer handle to the door mechanism. Then press out the pins and remove the handle. Then remove the screws around the perimeter of the door that hold the outer panel. The panel should lift off, exposing all of the inner workings, then you can verify that the inner panel does NOT come off.
what steps are required to remove the inside door panel on a 1997 Chevy Malibu.
remove the window handle, remove screws from armrest, remove the inner door handle and the screw on the lower rear of the door panel, lift the panel upwards to remove from the slots along the bottom of the door.
Clips hold the door panel in place. To remove the panel, you will need a small pry bar and apply gentle pressure to the gap between the panel and the inner part of the door.
i have a 2004 Toyota tundra double cab i want to remove passenger door panel to tight door handle
Remove inner door panel for access
Remove inner door panel for acess
remove inner door panel for access to lock
luck
you need to remove the inner door panel. Usually pop grommets but may be screwed. That will give you acess to the crank and the inner workings of the door to remove and connect a power window if needed.