Remove inner door panel for access
They are bolted from the inside of the door.
take off door panel by removing screws, push in on middle of holders ,lift panel off of door release clips on door lock and door handle rod remove handle.
Remove the inside door panel from your 1994 Chevrolet. Remove the linkage from the door handle. Remove the door handle retaining bolts. Reverse the process to install the new door handle.
You can replace the inside drivers door handle by removing the door panel. With the door panel removed the door handle mechanism will be visible. Remove the linkage from the door handle. Remove the door handle retaining bolts. Reverse the process to install the new door handle.
remove door panel and small round plug from door jam to access nuts
take the inside door panel off and the water paper, disconnect any rods from the handle and then there should be 2 bolts that hold the handle on, take the bolts out and the handle will come out.
Need to know if it is an inside or outside door handle.
if rear side door; unlock and pull handle. if boot lid; pull handle in drivers side door-well (side of the drivers seat) "door open"
remove interior door panel, remove 2-4 speed nuts at back of door handle & the main linkage bar, it should come off.
Remove the inside door panel from your 1996 Dodge Avenger. Remove the door handle linkage. Remove the door handle retaining bolts. Reverse the process to install your new door handle.
on the drivers side door below the handle
Remove the inside door panel of your 1994 Chevy Lumina. Remove the door handle linkage. Remove the door handle retaining bolts. Reverse the process to install the new door handle.