Want this question answered?
yes
Up to 2007 the release is on the offside by the kick panel. 2007 on, the release is on the floor , open the nearside front door and you will see a red handle.
Remove the liftgate inner trim panel.Remove the liftgate inner trim panel.
remove the inner door panel, you can access the bolts from the inside of the door.
http://my107.blogspot.com/2007/02/how-to-remove-doorpanel.html is a good walk through :)
The inside door panel cannot be removed; instead, to get to the inner workings of the door remove the OUTER panel. Lift the outer door handle to expose the pins that hold the outer handle to the door mechanism. Then press out the pins and remove the handle. Then remove the screws around the perimeter of the door that hold the outer panel. The panel should lift off, exposing all of the inner workings, then you can verify that the inner panel does NOT come off.
what steps are required to remove the inside door panel on a 1997 Chevy Malibu.
Remove star shaped screw on side of panel by door latch and then pop casing off from where it meets the window. Panel is held in with popable clips so can be pulled off so far to enable access into door and handle mechanism. If changing door handle another star shaped screw will need removed from where handle for inner door is
luck
remove inner door panel for access to lock
how do i remove a door panel on my C5 my interior door opener is broken
remove the window handle, remove screws from armrest, remove the inner door handle and the screw on the lower rear of the door panel, lift the panel upwards to remove from the slots along the bottom of the door.