Want this question answered?
Remove the inside door panel of your 1997 Mercury Cougar. Remove the wiring harness from the window motor. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install the new window motor.
Remove the inside door panel of your 1999 Mercury cougar. The entire window mechanism will be visible. Remove the wiring harness from the window motor. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install your new window motor.
I would remove the door panel and have a look at what's going on in there the window has obviously popped out of the guide.
no
Begin by removing the inside door panel of your 2001 Mercury Villager. Remove the window motor wiring harness. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install your new window motor.
Take of the doors inside panel then the window should come out but watch incase it slips out as it could easily smash!
Put a brick through the window.
Remove inside door handle and window crank handle, remove inside door panel, remove vent window and channel assembly, remove window.
Remove the inside door panel of your 1982 Chevy Corvette. Remove the window retaining clips. The window will lift out.
Remove the wiper arm from the shaft by pressing in the small tab under the arm, and lift up. Then remove the nut on the shaft. That will leave you with only one more nut to remove from inside the window. It's on a bracket attached to the motor.
To retrieve it u must first take off the door panel and take out the window motor and scissor....DO NOT GET YOUR HAND CAUGHT IN THE BEAR TRAP......u will scream..go to any junkyard or parts store and get the window clips and glue...reverse procedure
Begin by removing the inside door panel. Remove the linkage from the window winder. Remove the window winder retaining bolts. The window winder will come off.