you need the key for the lug nuts. if you do not have the key then hit up either a Merchants or NTB or someone else that does tires
The rear wheels are secured by five bolts and nuts. Remove the nuts to remove the wheels. Make sure the vehicle is jacked up before loosening the nuts.
remove the jack. remove the hubcap. loosen the lug nuts. Raise the vehicle. remove the lug nuts. remove the flat tire. replace the tire. tighten the lug nuts. lower vehicle. tighten the lug nuts again. replace the hubcap.
1. Remove the five lug nuts 2. Remove the tire 3. Remove the four lug nuts 4. Remove the two screws 5. Remove the drum from around the brakes 6. Remove the four nuts underneath that 7. Pull the axle out
remove the six lug nuts
No, lug nuts hold your wheels onto the hub.
Loosen, don't remove the wheel nuts, then jack up the vehicle and support safely. Now remove the wheel nuts and then the tire.
Lift the vehicle with a car jack, remove the hub, remove the nuts, and remove the old tire. Next put on the new tire, replace the nuts, tighten down the nuts, replace the hub, and lower the car.
That car may have locking lug nuts if they are the factory originals. You would need the "key" for the lug nuts in order to remove them.
YOU CAN NOT REMOVE THE GAS TANK UNLESS YOU REMOVE THE BUMPER. THERE ARE NUTS LOCATED ALL THE WAY AROUND THE SEAM WHERE THE BUMPER MOUNTS UP TO THE BODY. 10MM NUTS. YOU NEED TO FOLLOW THE NUTS AND START REMOVING. YOU NEED TO REMOVE THE LISCENSE PLATE TO ACCESSS THE NUTS NEAR THAT AREA. UNHOOK ELECTRICAL TO BULBS ON THE WAY.
Remove the lug nuts
Jack up the vehicle and remove the lug nuts. To remove the lug nuts you will have to turn them to the left or counter clockwise. Then you remove the wheel by pulling it toward you. If you reverse the procedure you can reinstall it.
you will have to remove all the lug nuts. just like when you remove the tire!!