0
How to remove rear bumper on 1989 corvette does gas tank need to be removed first?
RonHarris
YOU CAN NOT REMOVE THE GAS TANK UNLESS YOU REMOVE THE BUMPER. THERE ARE NUTS LOCATED ALL THE WAY AROUND THE SEAM WHERE THE BUMPER MOUNTS UP TO THE BODY. 10MM NUTS. YOU NEED TO FOLLOW THE NUTS AND START REMOVING. YOU NEED TO REMOVE THE LISCENSE PLATE TO ACCESSS THE NUTS NEAR THAT AREA. UNHOOK ELECTRICAL TO BULBS ON THE WAY.
Wiki User
∙ 17y ago
Add your answer:
Earn +20 pts
How can I remove bumper stickers from my car?
Bumper stickers can be removed from a car. At first the bumper sticker should be dried with a hair drier. After one minute it can be removed. The are underneath the bumper stickers can be cleaned with water.
How do you remove the front grill on a 2007 Chevy Tahoe?
To remove the front grill on a 2007 Chevrolet Tahoe the bumper will need to be removed first. After the bumper is removed, take off the four screws and clips holding the grill in place. The grill is then ready to remove.
How do you get the bumper off a Ford Explorer?
i had to do this same thing just the other night. First at both ends of the bumper there is a supporter that has a Y at each end. first remove the bolt at the bottom of that. Then there are about 4 more bolt that connect to the frame in the center of the bumper remove those and if you removed the right bolts. it should come off.
How do you remove and replace the head lamp assembly in a 1992 Honda Accord?
first remove the bumper turn lights...two screws on one each light..then remove the lights carefully, so you do not break them.... After that...remove the bumper screws in the wheel wells.... Then, where you have removed the bumper lights...with a socket extension..and a 12 mm socket...remove two bolts on each bumper mounts.....then the bumper should come off in a forward direction.... you now have access to both headlight assemblys.
How do you remove the rear bumper on a 2004 Nissan Sentra?
To remove the rear bumper on the 2005 Nissan Sentra, you will first need to remove the rear bumper cover by using a flat tool to pry the pins. Then, access the bolts holding the bumper to the frame of the vehicle and remove the nuts. The bumper will then lift off.
How do you replace rear bumper 1992 300e?
First, remove the nut from the middle of the bumper, and then remove the nut from the the mounts at each rail frame. Then remove the nut or screw holding the bumper to the car at the area of the wheel. Remove the old bumper, put on the new bumper, and replace the screws in nuts in the reverse order.Ê
How do you remove a front bumper on a 1971 Corvette?
The front bumper is pretty easy to take off, as long as the bolts arent rust fast. The first bolts to take out are the ones holding the bumper guards in place they are down under the fiberglass felance. Then unbolt the two side bolts, then unbolt the two center bolts. RJ Sottilewww.hobbycarcorvettes.net
How do you remove bumper from X type?
First remove the bumper under tray, then remove the front of both front inner wheel liners. Then there is one 10mm bolt on both lh and rh sides behind the bumper above both front merker lights. Then remove the two 10mm bolts above both headlamp assemblies, and don't forget to remove the bumper slowly so that you can disconnect the bumper harness.
How does one remove a front bumper from a 1997 Jeep Grand Cherokee?
First remove the bumper cover. You need to take off the front grill to get at the plastic retainers that hold the top of the buimber on. There are about four retainers on the bootom of the bumper.
How do you remove a bumper from a 98' dodge avenger?
You can remove it in the same process as most other car bumpers. First Remove the splashguard bolts attached to the bumper. Open the hood , remove the headlights. Underneath you will find metal brackets that hold the bumper. Remove remaining bots on the top and underside of the bumper and eh presto. If you are really asking this though i suggest you leave it to a professional or someone more experienced.
How do you remove the rear bumper on a 1991 Nissan Stanza?
First remove the tailights then the trim piece on the rear body pannel(where the stanza emblem is) then you will see the bolts for the bumper hope this helps.
How do you replace a front bumper on a 1991 Ford Taurus?
If you crawl under the front of the car you should see two bumper mounts these look like a tube with a flat metal plate on either end. One plate is bolted to the bumper and the other is bolted to the radiator support. The bumper mounts are a shock absorber, so be aware that if these have been compressed too far due to damage they may need to be repalced (one or both) to get the bumper to line up evenly. The plate on the bumper mount that attaches to the bumper has 2-4 bolts that go through it into the bumper. Simply remove these and the bumper will come off. I suggest you loosen all of them first, then remove all but one from each mount. This will prevent the bumper from falling off prematurely. Then get someone to support the bumper while you remove the remaining bolts. Be aware that if you have the turnign lights in the bumper you need to unplug the lights from the bumper before you remove it. If you do not have an assistant, you can unbolt the bumper mount from the radiator support rather than from the bumper. It will stay in the radiator support even with all the bolts removed. Then once you have unbolted the mounts you cna climb out from under the car and pull the bumper straight out from the car and it will come out. Then if you are re-using the mount unbolt them and bolt them loosely to the new bumper. For either method get the bumper back up on the car (bolt the mount firmly to the radiator support if you removed it. Then lift and adjust the bumper until you have it lined up the best you can, and tighten one bolt per side to keep it in place. Then go back and tighten the other bolts.
