0
To remove the main seat on a ZR6, remove the black panels on each side of the bike just below the seat. They are each held with one Allen screw and have plastic pins in rubber sockets. So pull carefully as to not break the pins. Under these panels you will find two bolts, one on each side. Remove these two bolts, slide the seat slightly to the rear and it will come off.
Don
Big Daddy's Cycles
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Where is the main fuse on a Kawasaki 400 Ltd?
The main fuse on a Kawasaki 400 Ltd is located under the seat in the fuse box for most years. Some Kawasaki's have the fuse box located in one of the side panels.
How do you remove the key from the ignition of a Mercedes Benz 2007 c230?
To remove the main key, make sure it's in the 'off' position, and the car is in park. To remove the glove box key, push the skinny button on the top over and it will release.
Where is the main office for Kawasaki Insurance in Australia?
The Australian branch of Kawasaki Insurance is located at Unit Q, 10-16 South Street, Rydalmere NSW 2116, Australia. They can be contacted via their website as well.
What is the stock main jet size for 1994 kawasaki kx125?
165, if you run boyesen reeds its 160-162
Will the carburetor off a 1983 kawasaki kdx 200 fit on a 1984 kawasaki kdx 200?
Yes, both years use a Mikuni VM32SS carb. Everything is identical with the exception of a larger main jet in the 84.
How do you replace the main bearing on a 2510 kawasaki mule?
There is only one main bearing. It is on the flywheel side and is a plane bearing (not a ball or needle bearing). You have to remove the crankshaft, press the old bearing out and press the new one in. Once the new one is installed, it MUST be checked for proper oil clearance. If it's not correct (tight), it will lock and destroy the rest of the engine. There is only one main bearing. It is on the flywheel side and is a plane bearing (not a ball or needle bearing). You have to remove the crankshaft, press the old bearing out and press the new one in. Once the new one is installed, it MUST be checked for proper oil clearance. If it's not correct (tight), it will lock and destroy the rest of the engine.
How do you remove the crankshaft in a dodge stratus 2.7 L?
Remove the engine, place on an engine stand. Remove heads, oil pan, pistons, main caps and remove the crank.Remove the engine, place on an engine stand. Remove heads, oil pan, pistons, main caps and remove the crank.
What is the standard main jet size for a kawasaki klr 600?
0.138mm or just 138 that is standard for uk models rest of world varies
When was Main Julian England created?
Main Julian England was created in 2007.
When was The Main Monkey Business created?
The Main Monkey Business was created in 2007.
In what year did Main Street Capital Corporation - MAIN - have its IPO?
Main Street Capital Corporation (MAIN)had its IPO in 2007.
Does a 1991 kx100 rear wheel fit a cr85?
The rear tire size for the Kawasaki KX100 is 90/100-16 while the Honda CR 85 has a smaller rear tire of 90/90-14. The main difference is in the larger Kawasaki rim. I think it will fit.
