Panel clips at buttom and two screws under wood trim on straps and two under ash tray on door
Remove the door panel.
There is an access panel in the trunk you have to remove the carpet then you'll see the panel.
Using a screw driver, remove all of the screws and clips in the door panel, and gently pull the panel away from the frame. Remove any of the wire connectors, and pull the panel off the rest of the way.
remove the door panel, there are 2 bolts that you can get to through holes in the inside steel panel. remove 2 linkages. the handle will then come off from the outside.
ON THE 1995 Buick RIVIERA THE HORN IS LOCATED UNDER THE LEFT HAND SIDE FENDER. U WILL HAVE TO TAKE OFF THE TIRE AND REMOVE THE FENDER PANEL. THE HORN WILL BE ON THE RIGHT SIDE OF THE LEFT INNER FENDER.
ON THE 1995 BUICK RIVIERA THE HORN IS LOCATED UNDER THE LEFT HAND SIDE FENDER. U WILL HAVE TO TAKE OFF THE TIRE AND REMOVE THE FENDER PANEL. THE HORN WILL BE ON THE RIGHT SIDE OF THE LEFT INNER FENDER.
remove the face panel , it snaps in , under the CD palyer are 2 screws, remove then , pull it out and detatch the 2 wire pigtales
passenger side under dash. cover has to be remove to see it
how do you remove left rear door panel on a 2008 buick lucerne cxs.
its the sencor in the blinker plan on spending $500 or more part and labor they have to remove the steering wheel
lay down just under the turn signal. you will find a panel under the car undo the two screws remove panel door the rest is a cake walk
On the side of the dashboard on the Passenger side.