Lift up on the top half. Then pull out the bottom half
Push on the bottom of the bench seat to release the clips (have to push hard) Lift bench out You will see either clips or bolts holding the rear of the seat Release these and lift rear of seat up to release upper clips to remove seat back
The rear seat is not designed to be removed. You can remove the center seat and slide the rear seat forward.
I need to pull the springs back to eliminate the lombar
Remove the bolts fastening the rear seat cushion (Figure 7.52).Remove the rear seat cushion assembly.Remove the screws and remove the side rear seat back (Figure 7.53).Remove the lower bolts fastening the rear seat back.Tightening torque - 17-26 NmFlip forward the rear seat back, remove the bolts and remove the back seat.Tightening torque - 17-26 Nm
The rear seat isn't designed to be removed. If you have a center bench seat you can remove that by unclipping it, then slide the rear seat forward.
The rear seat is not intended to be removed. You can remove the center seat and slide the rear on forward into it's place.
How do you remove the rear seat on a 2002 diamante
Remove rear seat and panel underneath seat. How do I remove rear seat?!?!
remove the 2 bolts on the floor in front of the seat, and the 3 bolts on the floor at the rear of the seat.
There appear to be four large bolts holding the rear seat in place--and it also appears the adjustment mechanism is part of the seat, so that these four bolts are the entire apparatus. But I haven't tried it yet.
no
you must remove the bolt behind the rear seat and remove the rear seat then you will see 2 small Allen head bolts remove them and the seat will come right off.