Assuming that there weren't any major changes made to the designs between 98 and 2000, here is how I removed mine. The plastic speaker covers are attached permanently to the upholstry so rather than trying to remove them, you need to disconnect the upper breaklight by sliding it off and then unplugging it. Next, slide the entire upholstry piece off. It's all one large piece. Now, you just disconnect and unscrew the speakers. !
Try to use Toyota speaker adapter plugs so you don't need to cut wires and mess the electric system up. You can get them from Ebay or Amazon.
where is the fuel pump relay located on a 2000 toyota corolla
Where is the fuel injector on a 2000 Toyota Corolla
The 2000 Toyota Corolla uses a timing chain and normally requires no maintenance.
how much engine coolant dosee a 2000 toyota corolla hold
6" speakers in a 2000 Toyota camery
The starter is located on the front of the engine of the 2000 Toyota Corolla. It is placed on top of the transmission housing.
Same as a 1999. Look for "remove starter on 1999 Corola" post I answered. Same as a 1999. Look for "remove starter on 1999 Corolla" post I answered.
check this out for the details http://www.usedcarexpert.co.uk/stats/Toyota/Corolla/1997-2000
The Parts Needed for 2000 Toyota Corollahttp://www.autosparepartsusa.com/searchparts.aspx?make=76&made=Corolla&year=2000
The fuses in a Toyota Corolla 2000 are for various components of the car. For instance, the fuses power the windshield wipers, the radio, the power windows, and the power seats.
The average cost to paint a 2000 Toyota Corolla will depend on the shop you go to. Most places charge around $1,600, average.
In the fuel tank
The Toyota Corolla.
Remove the rear seat, there should be an access cover underneath it
yes u can I've done it but i have a high idle issue if the car is in park or neutral.
Actually, I believe all 2000 and up models have chains. I checked for our 2000 Corolla on Rockauto, and a chain comes up. This is what is stated on Toyota discussion sites.
Remove the covers to your 2000 Chevy Malibu rear speakers. Remove the speaker retaining screws. Remove the wiring harness from the back of the speakers. Reverse the process to install your new rear speakers.