Want this question answered?
Open the hood to the engine compartment. Remove the headlight wiring harness. Remove the headlight assembly bolts. There are four headlight assembly bolts. The headlight assembly will come out.
to remove the spindle and four bolts hold the bearing assembly to the "A" frame. remove the wheel, remove the control arm, remove the lower "A" frame , and remove the CV axle. then you will have acess to the 4 bolts that hold the bearing assembly. you will have to buy the whole assembly.
Remove the wiring harness from the back of the headlight. Remove the headlight assembly bolts. The headlight assembly will come out.
Remove tire, remove brake drum, remove brake assembly housing, remove 4 bolts from back of hub assembly, gently tap to remove hub/bearing assembly.
Begin by removing the wiring harness from the back of your headlight. Remove the headlight assembly retaining bolts. The headlight assembly will come out.
most places sell the complete hub assembly. You have to remove the brake assembly there are four bolts holding the hub assembly in place remove and reinstall
lift the hood remove the shocks first then remove the bolts holding the hood to the hinges make shur you have someone to help you with this so that you dont hurt yourself or the car
Figured it out... Remove plastic trim from on top of radiator support. Remove grill. Remove battery & light sockets. remove 4 bolts... remove headlight assembly. Cheers
2 or 4 of the 6 silver like rectangles in the center pop off and there are bolts under
You will need to remove the tail light covers in the cargo compartment. Remove the wiring harness. Remove the tail light assembly retaining bolts.
remove radiator assembly/ disconnect all bolts/ lift it from top
Raise and support the vehicle. Remove the tire and wheel assembly. Remove the axle nut. Remove the brake caliper and rotor. Remove the three mounting bolts from the hub and bearing assembly, note head of bolts faces inwards towards middle of car). Remove the hub and bearing assembly from the spindle. Install is the opposite of removal.