The first step to remove the seat of you Honda Steed 400 vlx is to remove the fuel tank. The fender struts have a tab the fits to a bracket on the seat. There are bolts and screws on each side that can the removed and you can lift off the seat back first then slide the tab out from the front. You may need to unloosen the fender stuts to allow for some wiggle rom with the tabs or alignment. The Struts are 12mm. If it is bolted in from the back of the rack. Remove the rear cover.
pull the back leaver forward and slowly lift with 10 people
one down and four up for vlx 400
its quite simple just remove your seat and fairing and almost directly below where the seat is your battery is sitting upright. just disconnect the cables and pull it out.how do you remove the seat on a vfr 400
96 honda 400
disconnted battery first or air bag will open . disconnect wires then bolts and remove. Replace in reverse
Under the seat right next to the battery are two 15 amp fuses under the cover.
Yes, the Honda Foreman 400 was made 1995-2003
No, a Honda Rancher 350 carburetor will not work on a Honda Rancher 400. The difference in the sizes of the 350 and 400 carburetors are not compatible with each other.
when standing behind machine, spark plug will be located on the left side of engine. to access this you must first remove the seat, then lift up the black rubber flap covering carb, then remove the the chamber device on the air intake. after this is complete you will see the spark plug and the spark plug wire
what is the valve adjustment procedures for a 1995 honda forman 400
The Honda VFR 400 Motorcycle's price range in 2013 ranges from $1,490 to $6,110. The Honda VFR 400 motorcycles were originally sold in Japan and eventually imported to the United States.
Please describe your How do you change ignition points in a 1983 Honda 400 3F problem: