You will first need to remove the coils and plug wires to access the spark plugs. The coils sit on top of the valve cover and are held in with small torx head screws. Then pry off the plug wires and remove the coil and wires together. Then you have access to the spark plugs.
Mark and remove plug wires. Remove spark plugs and install new plugs. Reattach plug wire to correct plug.
Changing the spark plugs in a Mercedes w208 320 1999 only requires two tools to be used. The first tool is a 3/8 wratchet that has a short extension and the second tool part is a universal socket. Attach the universal socket to the spark plug socket and use the wratchet to loosen each spark plug. Use the same tools to tighten the new spark plugs into place.
Disconnect the car's battery cables, remove the spark plug cables and boot covers, and remove the old spark plugs. Next, put in the new spark plugs, attach the boot covers and cables and reconnect the battery cables.
the spark plugs are located behind the glovebox inside the van. you have to remove the glovebox and carpet to get to the engine.
1999 Volkswagen Beetle how to change spark plugs
6 spark plugs
How do you change the spark plugs in a 1999 Nissan Altima. Can not get socket on the plug.
You have to remove the upper intake plenum.
each spark plug has own coil must remove coil first to get to plug
The spark plugs on a 1999 Mercury Cougar are located under the cover of the engine. The spark plugs should be changed approximately every 60,000 miles.
They are through the tops of the valve covers, remove the coils and access.
The spark plugs on a 1999 Mercury Cougar are located under the cover of the engine. The spark plugs should be changed approximately every 60,000 miles or so.