A rubber mallet comes in handy to breaking parts loose.
If you don't have one, use a piece of wood between the hammer and the starter - it buffers the impact and lessens the chances of damaging the part.
See "Related Questions" below for more
the bendix gear on the starter is stuck on the flywheel remove starter check bendix gear for wear if worn to bad replace starter
I would remove the starter and take it to a local auto parts store that offers free testing. Sure sounds like there is a dead-short inside. See "Related Questions" below for more about removing/installing a Windstar starter
It's actually on the starter, and it's the small cylinder attached to it. Windstar starters have a dual-purpose solenoid that not only engages the starter gear with the flywheel, but also acts as the starter relay.
How do i remove the rear back seats of my ford windstar minivan for cargo space
take it to a shop.
Remove - battery cable Raise and support vehicle Remove wiring at top of starter Remove starter mounting bolts Remove starter
yes you can
1995 Ford Winstar still wi.ll not start after changing starter. Now power going to it. What can be done?
Disconnect the - battery cable Remove wire at top of starter Remove Starter mounting bolts Remove starter
To remove a water pump from a 1998 Ford Windstar 3.0, you will need a tool called a tensioner. Disconnect the radiator and water hoses, then remove the water pump assembly.
Machete.
Bottom...